Schematic on the Fly Logo Cable Labels Logo SolutionBase Logo

The "Classic" Layout with Toggle

This is the CLASSIC Layout after a simple modification.

We made a copy of the CLASSIC Layout and then set the "Toggle Options" for "End A Termination" to "TOGGLE" with End B Termination". When printing, this causes every second Cabel Label to swap the positions of "End A Termination" and "End B Termination". In case this is not too clear, take a quick look back at the CLASSIC on the previous page and you will see they are the other way around!

The important point is that you only store the data in the Database once, it is swapped during printing so you do not have to duplicate the information which is confusing!
 
Looking at each line on the Cabel Label in turn:

The first line is the Termination Data for one end of the cable (End B), notice the arrow on the left hand side of the Data indicating which end of the cable this Data applies to.

The second line is the Termination Data for the other end of the cable (End A), notice the arrow on the right hand side of the Data indicating which end of the cable this Data applies to.

See how they are reversed to the CLASSIC?

The third line is the Cable Number or Cable Identification Code for the cable. This is a common format, however our Software is able to create many types and styles.

The fourth and fifth lines are available for any further information that may assist the user. Example. in analog broadcast use the words: "***TIMED***" are often placed here to indicate the cable's length is critical.